I need an EDS file for Ethernet/IP

  1. Home
  2. Knowledge Base
  3. Fieldbus Communication
  4. I need an EDS file for Ethernet/IP

An EDS file, which is read in the network configuration software, is used to establish, manage, and design networks on your PC.

DENSO Wave site

You can find a copy of the EDS file for the RC8 controller and other models on our DENSO Wave site.

Directly from the robot controller (Applies to RC8 / RC8A / COBOTTA)

  1. Make sure that you know your controller’s IP Address and that your PC has and IP Addres that is within the same network as your controller.
  2. Open a Web browser and go to the following addess http://<RC8 IP Address>/eds/. Replace <RC8 IP Address> for the IP address of your controller for example
  3. Download the file denso_RC8_eia_V1.1.eds
This image has an empty alt attribute; its file name is image.png

You can also obtain a copy of the EDS file from by connecting to the controller

Please consult the owner’s manual for more details and latest information on EDS file and Ethernet/IP https://www.fa-manuals.denso-wave.com/en/usermanuals/005836/

Was this article helpful?

Related Articles